| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Exterior | Section: Lighting (ext) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GQ3000X |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: ON-VEHICLE INSPECTION (2008 Sequoia) | ||
ON-VEHICLE INSPECTION
1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
|
(a) Disconnect the connector from the rear combination light. |
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
O21-2 - O21-1 |
Light control switch OFF |
Below 1 Ω |
|
Light control switch in TAIL |
11 to 14 V |
|
|
O21-3 - O21-1 |
Brake pedal released |
Below 1 Ω |
|
Brake pedal depressed |
11 to 14 V |
|
|
O23-1 - O23-2 |
Turn signal switch OFF |
Below 1 Ω |
|
Ignition switch ON and Turn signal switch in LH |
11 to 14 V (60 to 120 times per minute) |
2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
|
(a) Disconnect the connector from the rear combination light. |
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
O20-2 - O20-1 |
Light control switch OFF |
Below 1 Ω |
|
Light control switch in TAIL |
11 to 14 V |
|
|
O20-3 - O20-1 |
Brake pedal released |
Below 1 Ω |
|
Brake pedal depressed |
11 to 14 V |
|
|
O22-1 - O22-2 |
Turn signal switch OFF |
Below 1 Ω |
|
Ignition switch ON and turn signal switch in RH |
11 to 14 V (60 to 120 times per minute) |
|
|